| Title |
Characteristic Comparison between PI and Hysteresis Voltage Control of High Voltage Unidirectional Inverter for Piezoelectric Load using FPGA |
| Authors |
김기석(Kim, Ki-Seok) ; 조용호(Cho, Yong-Ho) ; 김형섭(Kim, Hyeong-Seop) ; 강태삼(Kang, Tae-Sam) ; 홍선기(Hong, Sun-Ki) |
| DOI |
https://doi.org/10.5370/KIEE.2017.66.1.48 |
| Keywords |
Piezoelectric ; Unidirectional inverter ; Hysteresis control ; Fly-back converter |
| Abstract |
In this paper, hysteresis voltage control method is proposed to an unidirectional inverter control for piezoelectric load. Piezoelectric load has electrically RC characteristic, and is driven by the inverter to control the output voltage waveform. When controling the output waveform by PI control, appropriate gains need to be selected. However, hysteresis control may minimize the output distortion because it has maximum proportional gain. In addition, Hysteresis control algorithm has simple structure to realize and the response is fast. Although the switching frequency of the inverter by hysteresis control varies, the switching frequency for the piezoelectric load is lower than that by PI control for equivalent performance. In particular, on implementing the algorithm using FPGA, the algorithm can be implemented in fewer pabrics and the processing time can be reduced. The superiority of the proposed hysteresis voltage control was proved for piezoelectric load through simulation and experiment. |